4D Chrome Relief UV/LED Gel, 7ml

A Step-by-Step Guide to Creating Nail Designs on Gel Polishes and Gel or Acrylic Nails Using Chrome Relief Gel: Chrome Relief Gel is intended for creating nail designs using Chrome gel nail polishes. Nail designs using NAI_S Chrome Relief Gel can be created on gel nail polishes, gel or acrylic nails, on a matte surface or on a surface which has been treated with a top coat. 1. Use NAI_S Wipe Off 3in1 solution and a cotton pad to remove dust from the already prepared gel or acrylic nail surface or nail surface to which gel nail polish has been applied. 2. Using Relief Gel and a fine brush, create a relief design. Cure in an LED (24/48W) lamp for 30 seconds, UV lamp for 3 minutes. 3. Wipe off the tacky layer with NAI_S Wipe Off solution. 4. Apply a thin coat of NAI_S Chrome gel nail polish; do not seal the free edge of the nail. Cure in an LED (24/48W) lamp for 10 seconds, then air dry for 2 - 3 or cure in a UV lamp for 30 seconds, then air dry for 2 - 3.* 5. Apply Chrome Top Coat and seal the free edge of the nail. Cure in an LED (24/48W) 30 seconds, UV 3 minutes. 6. Apply NAI_S Cuticle Oil (Cranberry/Freesia or Wild Cherry/Strawberry) to cuticles and massage NAI_S Organic Lotion into the hands. * If you want to apply two coats of Chrome gel polish, the second coat should be applied after the first coat has cured and air dried for 30 seconds. The second coat should be cured as described in Step 5. This is a soak-off formula which can be removed by soaking.