Master Gel LED UV - Clear

A Step-by-Step Guide to Applying Chrome Gel Polish on Natural Nails: 1. Prepare the natural nails for gel polish application.* 2. Apply a coat of Chrome Base and seal the free edge of the nail. Cure in an LED (24/48W) lamp for 30 seconds or in a UV lamp for 3 minutes. 3. Apply a coat of Chrome Top and seal the free edge of the nail. Cure in an LED 30 seconds, UV - 3 minutes. 4. Before applying Chrome gel nail polish, make sure there is no moisture, roughness or dust on the nail surface and that it is perfectly smooth. 5. Apply a thin coat of Chrome gel nail polish (just as you would apply a regular nail polish); do not seal the free edge of the nail. Cure in an LED (24/48W) lamp for 10 seconds, then air dry for 2 - 3 minutes or cure in a UV lamp for 30 seconds, then air dry for 2 - 3 minutes.** 6. Apply Chrome Top Coat and seal the free edge of the nail. Cure in an LED (24/48W) lamp for 30 seconds or in a UV lamp for 3 minutes. 7. Apply NAI_S Cuticle Oil to cuticles and massage NAI_S Organic Lotion into the hands. * Please see the file A Step-by-Step Guide to Preparing Nails for Gel or Gel Nail Polish Application. ** If you want to apply two coats of Chrome gel polish, the second coat should be applied after the first coat has cured and air dried for 30 seconds. The second coat should be cured as described in Step 5. This is a soak-off formula which can be removed by soaking. A Step-by-Step Guide to Applying Chrome Gel Polish on Gel or Acrylic Nails: 1. Add nail extensions or sculpt the nails as usual.* 2. Use NAI_S Wipe Off 3in1 solution and a cotton pad to remove dust from the nail surface. Make sure there is no roughness on the nail surface and that it is perfectly smooth. 3. Apply a coat of Chrome Top and seal the free edge of the nail. Cure in an LED (24/48W) lamp for 30 seconds or in a UV lamp for 3 minutes. 4. Before applying Chrome gel nail polish, make sure there is no moisture, roughness or dust on the nail surface and that it is perfectly smooth. 5. Apply a thin coat of Chrome gel nail polish (just as you would apply a regular nail polish); do not seal the free edge of the nail. Cure in a LED (24/48W) lamp for 10 seconds, then air dry for 2 -3 or cure in a UV lamp for 30 seconds, then air dry for 2 - 3.** 6. Apply Chrome Top Coat and seal the free edge of the nail. Cure in an LED (24/48W) lamp for 30 seconds or in a UV lamp for 3 minutes. 7. Apply NAI_S Cuticle Oil to cuticles and massage NAI_S Organic Lotion into the hands. * Please see the file A Step-by-Step Guide to Gel Nails Using Forms and Quick Builder Clear or Builder Masque Base. ** If you want to apply two coats of Chrome gel polish, the second coat should be applied after the first coat has cured and air dried for 30 seconds. The second coat should be cured as described in Step 5. This is a soak-off formula which can be removed by soaking.